| HMCERA Production capacity |
| HMCERA material homemade |
| HMA - 998: Al2O3, with good dielectric properties and corrosion resistance |
| Hma-95:95% Al2O3, has better corrosion resistance |
| Hmz-y: ZrO295% contains 3 moles of Y2O3, with good mechanical properties at normal temperature |
| Hmz-mg: Mg stable ZrO2 has good mechanical properties at high temperature |
| Hmaz-zta85: toughening Al2O3, with better mechanical properties than Al2O3 ceramics; |
| HMAT- 1800: the temperature can reach 2,000 degrees |
| HMCERA sintering ability |
| External diameter: maximum outer diameter (zirconia 500mm alumina 600mm) |
| Length of sintering: the maximum degree is 2200 mm |
| HMCERA finishing ability |
| The maximum height is 600mm |
| The maximum length is 2500 mm |
| Maximum outer diameter of 600 mm |
| The maximum CNC length is 1200 mm |
| Dimensional accuracy and tolerance |
| Dimensions: plus or minus 0.01mm |
| Flatness: less than or equal to 3 mm /485 mm |
| Cylindricity: 2 or less (including m/Ф x L500 50 mm |
| Surface roughness: Ra 0.01~Ra 0.2 or equivalent |
|
